Drifta Stockton Freestanding 270 Awning. Can be attached directly to Wildland RTT using additional brackets available to be purchased or mounted to standard rack set ups with the supplied L-shaped brackets. Velcro attach wall kits, available in LHS/RHS version, the perfect lightweight full freestanding 270.
BEST TO WATCH THE DEMO VIDEO FOR ALL THE INFO.
– 270 degree freestanding awning
– very easy to set up and pack up
– can be attached direct to the Wild Land tent with additional brackets.
REAR TAILGATE IN THE WAY? EASY SOLUTION. WATCH THE VID FOR MORE INFO 🙂
YOU WANT TO MOUNT THE 270 ON YOUR RTT… THIS IS THE IDEAL SPACING 🙂
Spacing for bolts is 40mm in case you want to use existing brackets
SENT FROM CUSTOMER:
To install I used;
-6x 25mm m8 bolts with 6x m8 (supplied) nuts., 25mm is just enough length to engage the thread on 6 m8 nuts that you can slide into the frontrunner side rails. Anything shorter will not be able to engage the threads of the nuts properly.
-3x 50mm m8 bolts to connect the brackets to the slats of the rack
-3x 20mm 8mm spacer/bushings with 6x 2mm m8 nylon washers to protect the roofrack and bracket OR 3x24mm 8mm spacers if you’re not too bothered by metal-metal contact on the rack. The side rails are slightly higher than the slats, so in order to secure the bracket this is needed. For now I used a stack of washers, will change mine when I get the lathe up and running.
Reviews
There are no reviews yet.